Published June 2003
| Version v1
Journal article
Wear behavior of nanocrystalline Cu-Zn alloy
Creators
- 1. University of Science and Technology Beijing. Department of Materials Physics (China)
- 2. Jilin University. College of Materials Science and Engineering, Nanling Campus (China)
Description
The wear behaviors of nanocrystalline Cu-Zn alloy were investigated. Sliding wear tests were performed on a pin-on-disk test machine under dry conditions. Results indicated that nanocrystalline Cu-Zn alloy annealed at 300 °C exhibited better wear resistance and high load-bearing capacity than those in the as-pressed state. A surface film almost covering the entire worn surface was formed for nanocrystalline Cu-Zn alloy annealed at 300 °C at a load range from 2.1–5.6 MPa. The surface film effectively improves the wear resistance of nanocrystalline Cu-Zn alloy.
Additional details
Identifiers
Publishing Information
- Journal Title
- Journal of Materials Engineering and Performance
- Journal Volume
- 12
- Journal Issue
- 3
- Journal Page Range
- p. 312-316
- ISSN
- 1059-9495
- CODEN
- JMEPEG
INIS
- Country of Publication
- United States
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 55080437
- Subject category
- S36: MATERIALS SCIENCE; S77: NANOSCIENCE AND NANOTECHNOLOGY;
- Descriptors DEI
- ANNEALING; COPPER; COPPER ADDITIONS; COPPER ALLOYS; CRYSTALS; DISPERSION HARDENING; FILMS; METALLURGICAL EFFECTS; NANOSTRUCTURES; NITROGEN ADDITIONS; SURFACES; TITANIUM ADDITIONS; WEAR; WEAR RESISTANCE
- Descriptors DEC
- ALLOYS; COPPER ALLOYS; ELEMENTS; HARDENING; HEAT TREATMENTS; MECHANICAL PROPERTIES; METALS; TITANIUM ALLOYS; TRANSITION ELEMENT ALLOYS; TRANSITION ELEMENTS
Optional Information
- Copyright
- Copyright (c) 2003 © ASM International 2003