Published February 2002 | Version v1
Journal article

Composition and microstructure of A4Te-B23Te3 eutectic alloys

Creators

  • 1. Nakhichevanskij Gosudarstvennyj Univ., Nakhichevan' (Azerbaijan)

Description

The compositions and temperatures of the eutectic alloys are more accurately defined, their morphology and the possibility of obtaining the A4Te-B23Te3 oriented eutectics through the directed crystallization method are studied. It is shown, that only in two systems GeTe-In2Te3 and PbTe-In2Te3 the eutectics contain prevailing quantity of the In2Te3 more low-fusible component. The phase ordering rate in the middle part of the eutectic ingots was somewhat higher as in the surface layers. The phases in the eutectic alloys are basically discontinuous

Abstract (Russian)

Уточнены составы и температуры эвтектических сплавов, исследована их морфология и возможность получения методом направленной кристаллизации ориентированных эвтектик систем A4Te-B23Te3. Показано, что только в двух системах GeTe-In2Te3 и PbTe-In2Te3 эвтектики содержат преобладающее количество более низкоплавкого компонента In2Te3. Степень упорядоченности фаз в средней части эвтектических слитков была несколько выше, чем в поверхностных слоях. Фазы в эвтектических сплавах являются в основном прерывистыми

Additional details

Additional titles

Original title (Russian)
Состав и структура эвтектических сплавов систем А

Publishing Information

Journal Title
Neorganicheskie Materialy
Journal Volume
38
Journal Issue
2
Journal Page Range
p. 151-152
ISSN
0002-337X
CODEN
NEOMB8

Optional Information

Notes
10 refs.; 1 tab.; 1 fig.