Published March 1978 | Version v1
Journal article Metadata-only

Properties of the T15K6 alloy prepared on the basis of a tungsten powder

Creators

Description

The properties of the T15K6 alloy whose preparation involved supplying hydrogen as the WO3-filled cups were progressing, have been studied, and compared to those of the commercial alloy. To determine the conditions for moulding, the relative density of the samples was studied as a function of moulding pressure. The dependence of the alloy properties on sintering temperature (1470-1500 deg C) was also investigated. The best quality alloy was prepared from tungsten of initial grain size of 1 mcm. The strength of both alloys was about the same. Optimum conditions for preparation of the alloy are recommended

Additional details

Additional titles

Original title (Russian)
Свойства сплава Т15К6, приготовленного на основе «прямоточного» порошка вольфрама

Publishing Information

Journal Title
Tsvetn. Met.
Journal Issue
no.3
Series
Tsvetn. Met.

INIS

Country of Publication
USSR
Country of Input or Organization
USSR
INIS RN
10444662
Subject category
S36: MATERIALS SCIENCE;
Descriptors DEI
CERMETS; DENSITY; GRAIN SIZE; PRESSING; SINTERING; TENSILE PROPERTIES; TUNGSTEN CARBIDES; VERY HIGH TEMPERATURE
Descriptors DEC
CARBIDES; CARBON COMPOUNDS; COMPOSITE MATERIALS; CRYSTAL STRUCTURE; FABRICATION; MATERIALS WORKING; MECHANICAL PROPERTIES; MICROSTRUCTURE; PHYSICAL PROPERTIES; SIZE; TRANSITION ELEMENT COMPOUNDS; TUNGSTEN COMPOUNDS

Optional Information

Notes
For English translation see the journal Sov. J. Non-Ferrous Met.