Published 2021 | Version v1
Journal article Metadata-only

Optimization of use conditions for cathodic arc nickel coating doped with phosphorus

Creators

  • 1. A.V. Luikov Heat and Mass Transfer Institute of the National Academy of Sciences of Belarus, Minsk (Belarus)
  • 2. Presidium of the National Academy of Sciences of Belarus, Minsk (Belarus)
  • 3. National Science Center "Kharkov Institute of Physics and Technology", Kharkiv (Ukraine)
  • 4. Joint Institute of Mechanical Engineering of the NAS of Belarus (Belarus)
  • 5. Somnio Global, Novi (United States)

Description

The results of tribological tests for a cathodic arc nickel coating doped with phosphorus are presented. The coating (thickness of 2 μm) is applied by a vacuum arc method from a nickel target with 6% phosphorus. The friction coefficient (Cfr) was determined on the tribometer, the depth of wear h of the coating after tribological tests was determined by the contact profilometry method, and the specific volumetric wear (ω) was calculated. The obtained values of Cr, ω, and h were used to optimize the parameters of tribological tests (load and slip frequency). (author)

Additional details

Publishing Information

Journal Title
Voprosy Atomnoj Nauki i Tekhniki
Journal Issue
no.5-135
Journal Page Range
p. 104-110
ISSN
1562-6016

INIS

Country of Publication
Ukraine
Country of Input or Organization
Ukraine
INIS RN
52123069
Subject category
S36: MATERIALS SCIENCE;
Descriptors DEI
CATHODES; DOPED MATERIALS; ELECTRIC ARCS; FRICTION FACTOR; MICROHARDNESS; MORPHOLOGY; NICKEL; OPTIMIZATION; PHOSPHORUS; SCANNING ELECTRON MICROSCOPY; TRIBOLOGY; VACUUM COATING
Descriptors DEC
CURRENTS; DEPOSITION; DIMENSIONLESS NUMBERS; ELECTRIC CURRENTS; ELECTRIC DISCHARGES; ELECTRODES; ELECTRON MICROSCOPY; ELEMENTS; HARDNESS; MATERIALS; MECHANICAL PROPERTIES; METALS; MICROSCOPY; NONMETALS; SURFACE COATING; TRANSITION ELEMENTS