Trace element determination in high-purity scandium by neutron activation analysis and pre-irradiation matrix separation

A pre-irradiation separation procedure has been developed for the determination of trace elements in high-purity scandium by neutron activation analysis. The sample is dissolved in high-purity concentrated hydrochloric acid and scandium is extracted with the same volume of a solution of 50 vol.% bis (2-ethyl hexyl)-orthophosphoric acid (HDEHP) in toluene. The scandium matrix is removed from the most important trace impurities and the residual amount of Sc is in the range of 0.001 %. The separation is carried out in the vial to be used in irradiation to prevent sample contamination. Detection limits in the ppb range were achieved with a sample of 10 mg, a thermal neutron flux of 2 x 1013n x cm-2 x s-1 and an irradiation time of 48 hours. Most of the elements sought in two samples of high-purity scandium were below the detection limits. (author) 7 refs.; 2 figs.; 3 tabs