Published 1993
| Version v1
Report
Quench simulation of the 40 mm aperture SSC-quadrupole magnet connected in series with 50 mm aperture SSC-dipole magnets
Description
The hot-spot temperature is estimated for a Collider Quadrupole Magnet (CQM) connected in series with Collider Dipole Magnets (CDM's) and for a quench appearing in CQM. An active protection system is studied where all magnets except the CQM's have heaters. These heaters cause a spot quench in each of the CDM outer layer conductors. Results indicate that the scheme is safe for a total induced quench time delay of less than 230 ms
Additional details
Publishing Information
- Imprint Title
- Proceedings of the 1993 Particle Accelerator Conference: Volume 4
- Imprint Pagination
- 738 p.
- Journal Page Range
- p. 2784-2786.
- Report number
- DOE/ER/40779--1-Vol.4
Conference
- Title
- international particle accelerator conference.
- Acronym
- PAC '93
- Dates
- 17-20 May 1993.
- Place
- Washington, DC (United States).
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 26025537
- Subject category
- S43: PARTICLE ACCELERATORS;
- Resource subtype / Literary indicator
- Conference, Non-conventional Literature
- Descriptors DEI
- DIPOLES; QUADRUPOLES; QUENCHING; SAFETY ANALYSIS; SUPERCONDUCTING MAGNETS; SUPERCONDUCTING SUPER COLLIDER
- Descriptors DEC
- ACCELERATORS; CYCLIC ACCELERATORS; ELECTRICAL EQUIPMENT; ELECTROMAGNETS; EQUIPMENT; HEAT TREATMENTS; MAGNETS; MULTIPOLES; STORAGE RINGS; SUPERCONDUCTING DEVICES; SYNCHROTRONS
Optional Information
- Contract/Grant/Project number
- Contract AC35-89ER40486
- Secondary number(s)
- CONF-930511--Vol.4.