Published 1981
| Version v1
Book
Tests on the influence of level of loading on the creep of concrete
Description
In this paper a small test program (16 specimens) about creep of concrete is described. The dependance of the final creep on the following parameters was investigated: - level of loading (about 0,3 to 0,8 βsub(c)) - quantity of cement (250 and 360 kg/m3 concrete respectively) - water/cement ratio (0,45 - 0,60 - 0,80) - consistence of the concrete mix (K2 and softer than K3 in the definition of the German code). The influence could be analysed clearly. The final creep increased with - an increased level of loading - the quantity of cement in the conrete - the water/cement ratio - softer consistence of the conrete mix. A comparison with the German code values shows a good conformity with the test results at lower level of loading. (orig.)
Abstract (German)
Es wird ueber ein kleines Versuchsprogramm (16 Kriechversuche) berichtet, in welchen die Abhaengigkeit des Endkriechmasses von folgenden Parametern studiert wurde: - Einfluss der Belastungshoehe (etwa 0,3 bis 0,8 x βsub(c)) - Einfluss des Zementgehaltes (250 bzw. 360 kg/m3 Beton) - Einfluss des w/z-Wertes (0,45 - 0,60 - 0,80) - Einfluss der Frischbetonkonsistenz (K2 und > K3) Die Einfluesse konnten deutlich analysiert werden. Das Endkriechmass steigt - bei Belastungshoehe 0,8 βsub(c) etwa auf das doppelte des Wertes im Lastbereich <= 0,3 βsub(c) - bei hohem Zementgehalt - bei hohem w/z-Wert - bei weicher Konsistenz. Ein fuer den unteren Lastbereich gueltiger Vergleich der Versuchswerte mit Werten nach DIN 1045 bzw. DIN 4227 ergab sehr gute Uebereinstimmung. (orig.)Additional details
Additional titles
- Original title (German)
- Versuche zum Einfluss der Belastungshoehe auf das Kriechen des Betons
Publishing Information
- Publisher
- Deutscher Ausschuss fuer Stahlbeton.
- Imprint Place
- Berlin (Germany, F.R)
- ISBN
- 3-433-00927-9
- Imprint Title
- Thermal expansion, modulus of elasticity, shrinkage, creep and residual strength of concrete for PCRVs at uniaxial stress state and elevated temperatures. Tests on the influence of level of loading on the creep of concrete
- Imprint Pagination
- 130 p.
- Journal Issue
- no. 305
- Series
- Schriftenreihe des Deutschen Ausschusses fuer Stahlbeton.
- Journal Page Range
- p. 113-130.
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 14727473
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- CONCRETES; CREEP; DYNAMIC LOADS; MECHANICAL TESTS; STATIC LOADS
- Descriptors DEC
- BUILDING MATERIALS; MATERIALS; MATERIALS TESTING; MECHANICAL PROPERTIES; TESTING
Optional Information
- Notes
- Imprint:Waermeausdehnung, Elastizitaetsmodul, Schwinden, Kriechen und Restfestigkeit von Reaktorbeton unter einachsiger Belastung und erhoehten Temperaturen. Versuche zum Einfluss der Belastungshoehe auf das Kriechen des Betons.