Published 2018 | Version v1
Journal article

Molybdenum adsorption properties of alumina-embedded mesoporous silica for medical radioisotope production

  • 1. National Institute for Material Science, International Center for Materials Nanoarchitectonics (MANA), Tsukuba, Ibaraki (Japan)
  • 2. Japan Atomic Energy Agency (JAEA), Oarai, Ibaraki (Japan)
  • 3. University of Tsukuba, Faculty of Medicine, Tsukuba, Ibaraki (Japan)
  • 4. Institute for Plasma Research, Gandhinagar, Gujarat (India)
  • 5. University of Tsukuba, Department of Radiation Oncology, Tsukuba, Ibaraki (Japan)
  • 6. Australian Institute for Innovative Materials (AIIM), University of Wollongong, North Wollongong, NSW (Australia)

Description

In this work, we have prepared alumina-embedded mesoporous silica and investigated their molybdenum (Mo) adsorption properties. To synthesize such materials, mesoporous silica particles were firstly synthesized via a soft-templated approach followed by the introduction of aluminium butoxide into the mesopores, which was converted into alumina by heat treatment at high temperatures. The obtained alumina-embedded mesoporous silica samples (Alx-MPS) were characterized by low- and wide-angle X-ray diffractions, nitrogen adsorption-desorption isotherms, and transmission electron microscopy. The effects of Al/Si ratios and calcination temperature on their Mo adsorption properties were also carefully investigated by using the batch method. The experimental results showed the following trend in Mo adsorption capacity in relation to the calcination temperature: 750°C > 600°C > 900°C > 1050°C and Al/Si molar ratio: Al0.1-MPS < Al0.3-MPS < Al0.5-MPS < Al0.6-MPS. (author)

Availability note (English)

Available from http://dx.doi.org/10.1246/bcsj.20170295

Additional details

Identifiers

Publishing Information

Journal Title
Bulletin of the Chemical Society of Japan (Online)
Journal Volume
91
Journal Issue
2
Journal Page Range
p. 195-200
ISSN
1348-0634

Optional Information

Notes
30 refs., 5 figs., 2 tabs.