Published August 1982
| Version v1
Journal article
Prediction of fatigue life under service loading using the relative method
Description
Fatigue life estimates obtained with the local strain approach (LSA) and with the conventional nominal stress approach (NSA) were compared with experimental results obtained on notched AlCuMg2 aircraft material specimens with flight simulation random tensile loading. The effect of change of the reference stress, of the loading program and of some changes in the loading frequency distribution, on the ratio Nsub(exp)/Nsub(pred) was investigated. A material strain-life curve, a cyclic stress-strain curve. The Neuber-Topper rule Ksub(sigma) x Ksub(epsilon) = K2 = const. and a K value estimated with an exact two-parameter notch factor formula for the case R = 0, N = 107 were used for life predictions. (orig./RW)
Abstract (German)
Die mit Hilfe der Verfahren der oertlichen (LSA) und der nominalen (NSA) Beanspruchungen berechneten Lebensdauerwerte wurden mit den an AlCuMg2-Kerbproben bei flugsimulierender zufallartiger Zugbelastung festgestellten Versuchswerten verglichen. Der Einfluss der Aenderung der Vergleichsspannung des Lastkollektivs und von einigen Aenderungen der Haeufigkeitsverteilung auf das Verhaeltnis Nsub(exp)/Nsub(pred) wurde untersucht. Eine Werkstoff-Deformations-Lebensdauerkurve, eine zyklische Spannungs-Dehnungs-Kurve, die Neuber-Topper-Regel ksub(sigma) x ksub(epsilon) = (ksub(f))2 = const. und ein mit der Zweiparameter-Formel berechneter Wert von ksub(f) (bei R = 0 und N = 107) wurden fuer die Lebensdauervorhersage angewendet. (orig./RW)Additional details
Publishing Information
- Journal Title
- Materialpruefung
- Journal Volume
- 24
- Journal Issue
- 8
- Series
- CODEN: MTPRA.;Materialpruefung.
- Journal Page Range
- 288-292
- ISSN
- 0025-5300
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 14746643
- Subject category
- S42: ENGINEERING;
- Descriptors DEI
- CRACK PROPAGATION; CRACKS; DEFORMATION; DYNAMIC LOADS; FATIGUE; LIFETIME; MATERIALS TESTING; STRAINS; STRESS ANALYSIS; STRESSES
- Descriptors DEC
- MECHANICAL PROPERTIES; TESTING