Published September 1, 2008 | Version v1
Journal article

Effect oxygen exposure on the quality of atomic layer deposition of ruthenium from bis(cyclopentadienyl)ruthenium and oxygen

  • 1. Department of Material Science and Engineering, POSTECH Pohang University of Science and Technology, San 31, Hyoja-Dong, Nam-Gu, Pohang, Gyungbuk, 790-784 (Korea, Republic of)
  • 2. Korea Electronics Technology Institute, 68 Yatap-Dong, Bundang-Gu, Seongnam, Gyeonggi, 463-816 (Korea, Republic of)

Description

The effect of the oxygen exposure on ruthenium atomic layer deposition (ALD) was investigated. Ru ALD was carried out using bis(cyclopentadienyl)ruthenium and oxygen gas. To investigate the effect of the oxygen exposure, the total oxygen exposure was changed by two different ways; change of exposure time at a constant flow and change of flow at a constant exposure time. While the increase in oxygen exposure time did not change the film properties, the increase in the oxygen flow rate resulted in a significant increase in the growth rate and resistivity. The properties of ALD Ru films prepared at different oxygen exposure conditions were analyzed by various techniques including synchrotron radiation X-ray diffraction, X-ray photoelectron spectroscopy, X-ray reflectivity, and transmission electron microscopy. The growth mechanism is discussed based on the analysis results

Availability note (English)

Available from http://dx.doi.org/10.1016/j.tsf.2008.02.011

Additional details

Identifiers

DOI
10.1016/j.tsf.2008.02.011;
PII
S0040-6090(08)00171-5;

Publishing Information

Journal Title
Thin Solid Films
Journal Volume
516
Journal Issue
21
Journal Page Range
p. 7345-7349
ISSN
0040-6090
CODEN
THSFAP

Optional Information

Copyright
Copyright (c) 2008 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.