Published 1995 | Version v1
Book

Detonation drive pellet injector

  • 1. Hiroshima Univ., Higashi-Hiroshima (Japan). Dept. of Mechanical Engineering

Description

Detonation drive pellet injector has been developed and tested. By this method the free piston is not necessary because the pellet accelerated the high pressure shock directly. In the experiment, the Teflon pellet (5 mm dia., 5 mm length) was accelerated by hydrogen, oxygen and dilution gas mixtured detonation. When the gas pressure was only 500 kPa and the mixture rates of hydrogen, oxygen and helium were 3:6:1 or 3:6:0, the Teflon pellet speed was up to 747 m/s. Typical experimental results over 300 kPa of the initial gas pressure range are 78--92% of the one-dimensional calculational values. It showed that the pellet could be accelerated by a relative low pressure gas. When the helium dilution rate is larger than 20%, it was often found the strong detonation of which speed is more than the Chapman-Jouguet speed. Then the pellet speed above 1,100 m/s was obtained

Additional details

Publishing Information

Publisher
Institute of Electrical and Electronics Engineers, Inc.
Imprint Place
Piscataway, NJ (United States)
ISBN
0-7803-2969-4
Imprint Title
1995 IEEE 16. symposium on fusion engineering. Volume 2
Imprint Pagination
851 p.
Journal Page Range
p. 1578-1581.

Conference

Title
16. IEEE/NPSS symposium on fusion engineering - seeking a new energy ERA (Sofe 95).
Dates
1-5 Oct 1995.
Place
Champaign, IL (United States).

INIS

Country of Publication
United States
Country of Input or Organization
United States
INIS RN
28048047
Subject category
S70: PLASMA PHYSICS AND FUSION TECHNOLOGY;
Resource subtype / Literary indicator
Conference, Numerical Data
Descriptors DEI
EXPERIMENTAL DATA; FUEL FEEDING SYSTEMS; PELLET INJECTION; PERFORMANCE TESTING; THERMONUCLEAR REACTOR FUELING
Descriptors DEC
DATA; FUEL SYSTEMS; INFORMATION; NUMERICAL DATA; TESTING

Optional Information

Secondary number(s)
CONF-950905--.