Published December 15, 2015
| Version v1
Journal article
Shear punching studies on an impact loaded reinforced concrete slab
Description
A shear punching test series is being carried out at VTT by using as a target a two way simply supported concrete plate with a span of 2 m and a thickness of 25 cm. The mass of the impacting stainless steel missile-type projectile is 50 kg. The capabilities of different types of calculation methods in assessing local shear deformation and possible shear punching cone formation are studied. Numerical solutions are compared with experimental results of test called X3.
Availability note (English)
Available from http://dx.doi.org/10.1016/j.nucengdes.2015.04.018Additional details
Identifiers
- DOI
- 10.1016/j.nucengdes.2015.04.018;
- PII
- S0029-5493(15)00145-4;
Publishing Information
- Journal Title
- Nuclear Engineering and Design
- Journal Volume
- 295
- Journal Page Range
- p. 730-746
- ISSN
- 0029-5493
- CODEN
- NEDEAU
INIS
- Country of Publication
- Netherlands
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 48002417
- Subject category
- S42: ENGINEERING;
- Descriptors DEI
- CALCULATION METHODS; COMPARATIVE EVALUATIONS; DEFORMATION; MASS; MISSILES; NUMERICAL SOLUTION; PLATES; PROJECTILES; REINFORCED CONCRETE; SHEAR; SLABS; STAINLESS STEELS; THICKNESS
- Descriptors DEC
- ALLOYS; BUILDING MATERIALS; CARBON ADDITIONS; COMPOSITE MATERIALS; CONCRETES; DIMENSIONS; EVALUATION; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; MATERIALS; MATHEMATICAL SOLUTIONS; REINFORCED MATERIALS; STEELS; TRANSITION ELEMENT ALLOYS
Optional Information
- Copyright
- Copyright (c) 2015 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.