Progress of high-power and long-pulse ECRF system development in JT-60

A new gyrotron operation technique to increase oscillation efficiency was developed using the JT-60 electron cyclotron range of frequency (ECRF) system. In order to increase the efficiency without a significant increase in the anode leakage current by trapped electrons that limits the efficiency of gyrotrons with a collector potential depression technology, we actively optimized the electron pitch factor by controlling only the anode voltage within ∼0.1 s after the start of the gyrotron operation, and a high-efficiency oscillation in the so-called hard-self-excitation region was achieved from the start of the oscillation. As an application of this technique in the JT-60 ECRF system, the gyrotron output power of 1.5 MW for 4 s, which is the longest pulse length in the world at an output power of 1.5 MW, was recorded with a successful reduction in the collector heat load by 20% as compared with the conventional operation. The reduced collector heat load at the 1.5 MW operation was acceptable for a steady-state operation. Further progress was made with respect to the expansion of the long-pulse capability of the ECRF system. A new gyrotron with an improved mode converter was developed in order to demonstrate a reduction in the stray radiation in the gyrotron; such radiation has thus far hindered long-pulse operations by causing an unacceptable heat load. We confirmed that the stray radiation was reduced to 1/3 of that of the original gyrotron; this reduced heat load is acceptable for steady-state operation. A conditioning operation of the improved gyrotron proceeds up to 31 s at 1 MW. This progress significantly contributes to an enhancement in the high-power and long-pulse capability of the ECRF system used in JT-60SA, where a total output power of 9 MW for 100 s is planned.