Published 1993
| Version v1
Report
Parametric studies with PARMELA to improve SLC performance
Description
The PARMELA particle dynamics code has been used at SLAC to simulate the SLC injector from the electron gun through the first accelerator section. The strength of injector components was set and tuned based on the simulation results. Parametric studies with PARMELA were conducted in which injector components were varied in an incremental fashion to study their effects on beam parameters such as transmission of current, capture of the charge in 20 degrees of S-Band, required for satisfactory spectrum, and emittance. The authors discuss the results of their simulation and its application to optimizing the performance of the injector
Additional details
Publishing Information
- Imprint Title
- Proceedings of the 1993 Particle Accelerator Conference: Volume 4
- Imprint Pagination
- 738 p.
- Journal Page Range
- p. 3063-3065.
- Report number
- DOE/ER/40779--1-Vol.4
Conference
- Title
- international particle accelerator conference.
- Acronym
- PAC '93
- Dates
- 17-20 May 1993.
- Place
- Washington, DC (United States).
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 26025274
- Subject category
- S43: PARTICLE ACCELERATORS;
- Resource subtype / Literary indicator
- Conference, Non-conventional Literature
- Descriptors DEI
- COMPUTERIZED SIMULATION; ELECTRON SOURCES; P CODES; PERFORMANCE; STANFORD LINEAR COLLIDER
- Descriptors DEC
- ACCELERATORS; COMPUTER CODES; LINEAR ACCELERATORS; LINEAR COLLIDERS; PARTICLE SOURCES; RADIATION SOURCES; SIMULATION
Optional Information
- Contract/Grant/Project number
- Contract AC03-76SF00515
- Secondary number(s)
- CONF-930511--Vol.4.