Towards a multi-physic platform for fusion magnet design—Application to DEMO TF coil

Highlights: • Development of a coupled thermal and thermo-hydraulics simulation tool. • Validation on the simulation of a heat exchanger. • Application to DEMO TF coil on a burn scenario. • Assessment of the temperature margin criterion. - Abstract: In the framework of the EUROfusion DEMO project, studies are conducted in several European institutions for designing the tokamak magnet systems. In order to generate the high magnetic fields required for the plasma confinement and control, the reactor should be equipped with superconducting magnets, the reference design being based on Cable-In-Conduit Conductors (CICC) cooled at cryogenic temperatures by forced circulation of supercritical helium. In order to propose a toroidal field (TF) winding pack (WP) design compatible with DEMO requirements, CEA has developed several tools addressing the different areas related to magnet dimensioning. An accurate calculation of magnetic field along the conductors is provided by the TRAPS code, and conductor design is performed by using an integrated macroscopic home design code based on simplified models accounting for superconducting properties, mechanics and thermal. This multi-physic tool gives a realistic but not assessed design. Indeed it is based on an assumed operating temperature that must be validated with an elaborate code, since it is linked with temperature margin design criterion (1.5 K). A dedicated modelling tool was developed by coupling the THEA code for 1D thermo-hydraulics in cables and the Cast3M code for 2D transverse thermal diffusion in a limited number of coil cross-sections, enhancing the accuracy of the outputs as being a quasi-3D approach. This tool allows a better assessment of the flux exchange between WP and casing, and the modelling of inter-turn and inter-pancake thermal coupling. The coupling methodology is described, as well as its validation on the simulation of a heat exchanger. A calculation was performed on the CEA proposal for DEMO TF coil in a burn (steady state) scenario, and finally providing a realistic assessment of the temperature margin.