Published August 1986 | Version v1
Report

Measurements and calculations of 10B(n,He) and 235U(n,f) reaction rates in a control rod mockup in ZPPR

  • 1. Argonne National Lab., Idaho Falls, ID

Description

Results are reported for 10B(n,He) reaction rate measurements inside B C pellets in a prototypic control rod mockup in the Zero Power Plutonium Reactor. The helium accumulation fluence monitor (HAFM) technique was used, with absolute amounts of helium measured by isotope dilution mass spectrometry. Rates of 235U fission were measured in foils irradiated between B4C pellets. Both helium production and uranium fission rates were calculated using three-dimensional nodal transport methods. Average C/E values in the control rod were 0.961 +/- 0.034 for boron capture and 1.094 +/- 0.008 for uranium fission based on ENDF/B version V.2 cross sections. The C/E values were nearly constant in the rod interior but changed by a few percent near the rod tip. For both reactions, the C/E values were brought closer to unity by increasing the boron capture cross sections

Additional details

Publishing Information

Imprint Title
Proceedings of the topical meeting on reactor physics and safety: Sessions 11-16. Volume 2
Journal Page Range
p. 1145-1156.
Report number
NUREG/CP--0080-Vol.2

Conference

Title
Advances in reactor physics and safety meeting.
Dates
17-19 Sep 1986.
Place
Saratoga Springs, NY (USA).