Requirements for characterization of DWPF canister welds and labels, and estimates of service life

The Department of Energy has established specifications for the DWPF product, which require that the DWPF provide estimates of the service life of the canister label, provide assurance that the DWPF canister will be leaktight when shipped, demonstrate that the contents of the canistered waste form will not lead to internal corrosion of the canister. The DWPF has elected to meet these requirements, in part, by characterizing canisters produced in the facility during the Startup Test Program. This includes canisters filled on the pour turntable (normal conditions) and canisters filled on the drain turntable (credible upset conditions expected to be more severe due to higher temperatures). This document identifies the requirements for characterization of the canister fabrication welds and canister labels (characterization of canister closure welds is being performed by Equipment Engineering Section), and for estimation of their service life in DWPF's Glass Waste Storage Building