Control systems for spallation target in China initiative accelerator driven system

In this paper, we report the design of the control system for the spallation target in China initiative accelerator driven sub-critical (ADS) system, where a heavy-metal target located vertically at the centre of a sub-critical reactor core is bombarded vertically by the high-energy protons from an accelerator. The main functions of the control system for the target are to monitor and control thermal hydraulic, neutron flux, and accelerator-target interface. The first function is to control the components in the primary and secondary loops, such as pumps, heat exchangers, valves, sensors, etc. For the commissioning measurements of the accelerator, the second function is to monitor the neutrons from the spallation target. The three-layer architecture has been used in the control system. In the middle network layer, in order to increase the network reliability, the redundant Ethernet based on Ethernet ring protection protocol has been considered. In the bottom equipment layer, the equipment controls for the above-mentioned functions have been designed. Finally, because the main objective of the target is to integrate the accelerator and the reactor into one system, the integration of accelerator's control system and the reactor's instrumentation and controls into the target's control system has been mentioned. (author)