CSAR 81-001 addendum 2: Use of a plexiglass contamination barrier in HC-227-T

Plutonium Finish Plant (PFP) Engineering requested a criticality safety evaluation (Appendix 1) to support a revision of Criticality Prevention Specification CPS-Z-165-80601 allowing a plexiglass enclosure (PGE) to be placed inside the HC-227T hood as a contamination barrier. The HC-227T hood is the receiving/transfer enclosure for Pu nitrate solution contained in Product Removal containers (PR Cans), L10 Containers (L10, Fl-10, 10 L) or L-3 Containers. Within the HC-227T, a 1.349 square meter (15 square foot) enclosure, PGE, has been created to provide contamination control around the weighing scale. Two or more standard criticality drains shall be installed on this enclosure prior to beneficial usage. The evaluation considered the normal process, spillage scenarios, waste/container accumulations within the enclosure, and interactions of Pu within the enclosure as well as other containers external to the enclosure. The results from the criticality safety analysis by CRA shows that such as contamination barrier can be placed inside the HC-227T Hood if the PGE is equipped with adequate criticality drains. In addition, other limits as well as administrative controls listed in CPS-Z-165-80601 Rev./Mod. B/0 and CPS-Z-165-80010 Rev./Mod. C/1 shall also apply