Published June 1987 | Version v1
Report

Microstructure, microchemistry, and microdeformation of Alloy 600 tubing

  • 1. Battelle Pacific Northwest Lab., Richland, WA

Description

Microstructural and microchemical characterizations were performed on two heats of Alloy 600 tubing that have been shown to be susceptible to IGSCC in primary water environments. U-bend and straight section regions of one of the heats (Tube R1-C7 removed from Trojan steam generator D) were examined and compared. Microchemical differences were identified by analytical electron microscopy (AEM) and Auger electron spectroscopy (AES). Chromium concentrations were lower and phosphorus segregation higher in the U-bend region versus that in the straight section. While these differences were small, they appear to be statistically valid. Results suggest that microchemical changes can occur during service exposure and are accelerated by the presence of a heavily deformed microstructure

Additional details

Publishing Information

Imprint Title
Proceedings: 1985 workshop on primary-side stress corrosion cracking of PWR steam generator tubing
Journal Page Range
p. 15.1-15.19.
Report number
EPRI-NP--5158

Conference

Title
Workshop on primary-side stress corrosion cracking of PWR steam generator tubing.
Dates
20-22 Mar 1985.
Place
San Diego, CA (USA).