Published August 2001
| Version v1
Journal article
Effect of aging and cold rolling on the microstructure and mechanical properties of a new Fe-Mn-Al-Cr-C duplex alloy
Creators
- 1. University of Blida. Institute of Mechanical Engineering, Department of Materials, Science and Engineering (Algeria)
Description
The microstructural changes that occur during aging and cold rolling of a new Fe-Mn-Al-Cr-C duplex alloy have been investigated. Two treatments were developed to produce either a good combination of tensile strength and ductility (σu=800 MPa, σy=525 MPa, and A=46%) or a high strength (σu=1340 MPa, σy=1200 MPa, and A=15%) with a ductile type of fracture after aging at 320 °C. Aging between 550 °C and 700 °C led to a significant decrease in strength and ductility due to the precipitation of the brittle βMn phase. However, aging above 750 °C showed a considerable increase in strength and ductility due to the precipitation of very fine grains of ferrite within the austenite phase.
Additional details
Identifiers
Publishing Information
- Journal Title
- Journal of Materials Engineering and Performance
- Journal Volume
- 10
- Journal Issue
- 4
- Journal Page Range
- p. 405-409
- ISSN
- 1059-9495
- CODEN
- JMEPEG
INIS
- Country of Publication
- United States
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 55080520
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- AGING; ALUMINIUM ALLOYS; AUSTENITE; BAINITE; CHROMIUM; DUCTILITY; FERRITE; FERRITES; FRACTURE PROPERTIES; MICROSTRUCTURE; PRECIPITATION; PRECIPITATION HARDENING; QUENCH AGING; ROLLING; STRAIN HARDENING; ULTIMATE STRENGTH
- Descriptors DEC
- AGING; ALLOYS; CARBON ADDITIONS; ELEMENTS; FABRICATION; FERRIMAGNETIC MATERIALS; HARDENING; IRON ALLOYS; IRON COMPOUNDS; MAGNETIC MATERIALS; MATERIALS; MATERIALS WORKING; MECHANICAL PROPERTIES; METALS; OXYGEN COMPOUNDS; SEPARATION PROCESSES; TENSILE PROPERTIES; TRANSITION ELEMENT ALLOYS; TRANSITION ELEMENT COMPOUNDS; TRANSITION ELEMENTS
Optional Information
- Copyright
- Copyright (c) 2001 © ASM International 2001