Published 1991
| Version v1
Report
Closed orbit correction in the SSC
Creators
- 1. Superconducting Super Collider Lab., Dallas, TX (United States)
Description
Most of the techniques associated with closed orbit correction are widely known. The present paper gives a brief description of one such method and discusses the results obtained when it is applied to the SSC collider lattice. The emphasis is on features of the lattice which effect closed orbit correction and it is likely that any of the 8 methods cataloged in a cited reference would yield similar results. The global scheme described here is very robust and easy to apply. The results of three separate studies are briefly described. Typical results for the residual RMS closed orbit in the arc is calculated to be 0.65 mm with peak values of 3 mm
Additional details
Publishing Information
- Imprint Title
- Conference record of the 1991 IEEE particle accelerator conference: Accelerator science and technology. Volume 1 of 5
- Imprint Pagination
- 689 p.
- Journal Page Range
- p. 348-350.
- Report number
- DOE/ER/40607--1-Vol.1
Conference
- Title
- 1991 Institute of Electrical and Electronics Engineers (IEEE) particle accelerator conference (PAC).
- Dates
- 6-11 May 1991.
- Place
- San Francisco, CA (United States).
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 24001627
- Subject category
- S43: PARTICLE ACCELERATORS;
- Resource subtype / Literary indicator
- Conference, Non-conventional Literature
- Descriptors DEI
- ALIGNMENT; BEAM DYNAMICS; CORRECTIONS; ORBITS; PARTICLE BEAMS; SUPERCONDUCTING MAGNETS; SUPERCONDUCTING SUPER COLLIDER; T CODES
- Descriptors DEC
- ACCELERATORS; BEAMS; COMPUTER CODES; CYCLIC ACCELERATORS; DYNAMICS; ELECTRICAL EQUIPMENT; ELECTROMAGNETS; EQUIPMENT; MAGNETS; MECHANICS; STORAGE RINGS; SUPERCONDUCTING DEVICES; SYNCHROTRONS
Optional Information
- Secondary number(s)
- CONF-910505--Vol.1.