Determining the J crack resistance curves on plates with surface cracks
Description
J crack resistance curves were determined experimentally on plates with surface cracks and on smooth and notched compact samples of the same thickness made of 22 Ni Mo Cr 37 in the context of investigations of the analysis and further development of fracture mechanics concepts based on the J integral and to verify the transmission chain of flat, small laboratory sample → component. Using a 3D elastic-plastic finite element calculation for a plate without crack growth with simplified boundary conditions, the experimental methods for J determination were tested. In the test case, the values of the J integral calculated by the finite element method are higher at most load stages than those obtained by the Garwood method, and lower than those obtained by the Read method. The investigations show that the J-R curves measured on notched compact samples can be used for the conservative assessment of surface cracks in plates of equal thickness. (orig./HP)
Availability note (English)
Available from Fraunhofer-Institut fuer Werkstoffmechanik, Freiburg im Breisgau (Germany, F.R.).Abstract (German)
Im Rahmen der Untersuchungen zur Analyse und Weiterentwicklung bruchmechanischer Versagenskonzepte auf der Basis des J-Integrals und zur Verifizierung der Uebertragungskette ebene, kleine Laborprobe → Bauteil wurden an Platten mit Oberflaechenrissen und an glatten und seitengekerbten Kompaktproben gleicher Dicke aus 22 Ni Mo Cr 37 J-Risswiderstandskurven experimentell ermittelt. Mit Hilfe einer 3D elastisch-plastischen FE-Berechnung fuer eine Platte ohne Risswachstum mit vereinfachten Randbedingungen wurden die experimentellen Methoden zur J-Bestimmung getestet. Fuer den Testfall liegen die mit den FE berechneten Werte des J-Integrals fuer die meisten Laststufen hoeher als die nach der Garwood-Methode und niedriger als die nach der Read-Methode. Die Untersuchungen zeigen, dass die an seitengekerbten Kompaktproben gemessenen J-R-Kurven zur konservativen Bewertung von Oberflaechenrissen in Platten gleicher Dicke anwendbar sind. (orig./HP)Additional details
Additional titles
- Original title (German)
- Bestimmung von J-Risswiderstandskurven an Platten mit Oberflaechenrissen
Publishing Information
- Imprint Pagination
- 40 p.
- Report number
- FhG-W--11/85
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 18050474
- Subject category
- S36: MATERIALS SCIENCE;
- Resource subtype / Literary indicator
- Non-conventional Literature
- Descriptors DEI
- CHROMIUM-NICKEL STEELS; CRACK PROPAGATION; CRACKS; FRACTURE MECHANICS; PLATES; SURFACES
- Descriptors DEC
- ALLOYS; CARBON ADDITIONS; CHROMIUM ALLOYS; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; MECHANICS; NICKEL ALLOYS; STAINLESS STEELS; STEELS
Optional Information
- Contract/Grant/Project number
- Contract RS 1500 488; IWM 304000 PTC-JR