Published October 2005 | Version v1
Journal article

Relationship between microstructure and Jc property in MgB2/α-Al2O3 film fabricated by in situ electron beam evaporation

  • 1. HVEM, Kyushu University, Fukuoka 812-8581 (Japan)
  • 2. ASEM, Kyushu University, Kasuga 816-8580 (Japan)
  • 3. ASTEC, Kyushu University, Kasuga 816-8580 (Japan)
  • 4. National Institute for Materials Science, Tsukuba 305-0047 (Japan)
  • 5. Faculty of Engineering, Kagoshima University, Kagoshima 890-0065 (Japan)
  • 6. Advanced Research Laboratory, Hitachi Ltd, Kokubunji 185-8601 (Japan)

Description

A transmission electron microscopy (TEM) study has been carried out on an MgB2/α-Al2O3 film that exhibits the typical property of critical current density (Jc) under magnetic fields. The MgB2 layer of 300 nm in thickness was grown on a (001)α-Al2O3 substrate using an in situ electron beam evaporation method. Jc of the film takes significantly high values when the applied magnetic field is perpendicular to the film surface. The MgB2 layer consists of fine columnar MgB2 crystals 20-30 nm in size. The columnar MgB2 crystals grow almost perpendicular to the substrate surface and have no crystallographic orientation relationship with the α-Al2O3 substrate because of an amorphous layer formed first on the substrate. A high density of columnar grain boundaries within the MgB2 layer may be effective for the enhancement of the flux-pinning under the perpendicular magnetic field

Availability note (English)

Available online at http://stacks.iop.org/0953-2048/18/1275/sust5_10_005.pdf or at the Web site for the journal Superconductor Science and Technology (ISSN 1361-6668) http://www.iop.org/

Additional details

Publishing Information

Journal Title
Superconductor Science and Technology
Journal Volume
18
Journal Issue
10
Journal Page Range
p. 1275-1279
ISSN
0953-2048
CODEN
SUSTEF