H-mode pedestal structure in the variation of toroidal rotation and toroidal field ripple in JT-60U

The effects of toroidal rotation and toroidal field (TF) ripple on the edge pedestal structure and edge-localized-modes (ELMs) were examined in JT-60U. The amplitude of the TF ripple was changed by the installation of ferritic steel tiles (FSTs). The profile of toroidal rotation VT became less counter with FSTs, particularly in the case where co-NBI was used in a large volume configuration. In this case, the plasma pressure was raised across the whole profile of the plasma. At the plasma edge, higher pedestal temperature was obtained with the growth of pedestal width. However, the effect of FSTs became less significant in a small volume configuration. As the VT became less counter at the pedestal, ELM frequency fELM was reduced and ELM energy loss ΔWELM was increased at fixed power crossing the separatrix Psep. The observed larger ELM energy drop at VT in a relatively co-direction involves the ELM perturbations of the electron temperature profile across an ELM that extends radially more inward. In addition, the inter-ELM transport loss is reduced and the pedestal pressure pped is weakly raised. The effect of FSTs appeared clearly in the large volume configuration where pped is raised even at a given VT at the pedestal while pped is not changed by FSTs at the small volume configuration. This suggests that the reduction of the TF ripple, the magnitude of which can affect the VT profile, plays a role in the increasing of pped. For increased pped due to the use of co-NBI and the reduction of TF ripple, the spatial width of the pedestal ion temperature became greater