Published May 2003 | Version v1
Journal article Metadata-only

Physical design of the Dragon-I linear induction accelerator

Creators

  • 1. Tsinghua Univ., Beijing (China). Dept. of Engineering Physics
  • 2. China Academy of Engineering Physics, Mianyang (China). Inst. of Fluid Physics

Description

This paper describes the design considerations of the Dragon-I linear induction accelerator (LIA) at Institute of Fluid Physics, China Academy of Engineering Physics. The Dragon-I facility is an electronic linac and consists of a -2.0 MV/+1.5 MV bi-polarity inductive adder injector, 72 accelerating cavities, pulsed-power system, beam-transport, control and auxiliary systems. It can produce an electron beam of 3 kA, 20 MeV with pulse width of 90 ns (FWHM). Good accelerating voltage pulse for each cavity with width of 120 ns (FWHM) and up to 60 ns flattop within ±1% variation has been obtained for high beam quality

Additional details

Publishing Information

Journal Title
High Power Laser and Particle Beams
Journal Volume
15
Journal Issue
5
Journal Page Range
p. 502-504
ISSN
1001-4322

INIS

Country of Publication
China
Country of Input or Organization
China
INIS RN
35031148
Subject category
S43: PARTICLE ACCELERATORS;
Descriptors DEI
BEAM TRANSPORT; CAVITY RESONATORS; CONTROL SYSTEMS; DESIGN; ELECTRON BEAMS; INDUCTION; LINEAR ACCELERATORS; POWER SYSTEMS
Descriptors DEC
ACCELERATORS; BEAMS; ELECTRONIC EQUIPMENT; ENERGY SYSTEMS; EQUIPMENT; LEPTON BEAMS; PARTICLE BEAMS; RESONATORS