Benzenesulfonamide Derivatives as Complexants and Extractants for Addressing the Mercury Problem at the Savannah River Site

Mercury (Hg) is a major global pollutant arising from both natural and anthropogenic sources. Its widespread use in medicinal and industrial applications makes it a common chemical exposure and environmental pollutant. It can exist in several forms which include: Metallic mercury (Hg⁰), mercurous (Hg₂²⁺), mercuric salts (Hg²⁺), and organic mercury (e.g. CH₃Hg⁺), with the latter being the most toxic of all the species. Due to mercury's high toxicity, new approaches towards its detection has received significant attention in the scientific community. Mercury exposure at the Savannah River Site (SRS) has been a recent concern especially with increasing amounts of organic mercury in the saltstone. It originates mainly from its use as an acidic dissolution catalyst of aluminum cladding from target fuels within the uranium and plutonium processing operations [1]. It is present to an amount of about 60 metric tons in the high-level waste (HLW) tanks. Organic Mercury species have been found in low activity waste (LAW) at the site that eventually ends up in the saltstone. Therefore, there is a need for: i) Converting organic mercury to other less toxic forms and ii) Complexation and removal of Hg prior of disposal of LAW in saltstone. Various methods have been developed for selective sensing of mercury in the presence of other toxic metals. These methods include using ligands that can form organo-soluble metal complexes with different optical and spectroscopic properties that can be used for toxic metal sensing. In 2005, our group pioneered an ion-exchange extraction method, in which o-phenylenediamine-derived disulfonamides were used to complex and selectively extract and sense Pb²⁺ from aqueous solutions into an organic phase [2,3]. Herein, a disulfonamide and a bis-dansylamide have been shown to extract, complex and sense Hg(II). Ligand 1: The crystal structure of the disulfonamide-Hg complex confirms the complexation of Hg(II) with the ligand. Complexation was corroborated by the ¹H-NMR spectra obtained after contacting solutions of various concentrations of Hg²⁺ with 2 mM ligand in chloroform. Distinct resonances are observed at Hg/L ratio of 0.5 that are also observed for the isolated 1:2 complex. In the presence of excess mercury, new resonances, as well as the movement of Et₃N resonances indicate the formation of a different Hg-sulfonamide-triethylamine complex, presumably having 1:1 Hg:L stoichiometry. The electronic spectra of aqueous phases after extraction show that there was no free ligand absorption at 0.5 eq of Hg, indicating a complete complexation. Complexation was also confirmed by the UV-visible titrations with Hg²⁺ at constant ligand concentration. pH-dependent extraction carried out shows that extraction of Hg(II) by ligand 1 was over 90% for most alkaline pHs. Ligand 2: The crystal structure of the Ligand 2 complex formed with Hg(OAc)₂ shows a remarkable coordination pattern with 4:2 metal:ligand stoichiometry. The fluorescent bis-dansyl disulfonamide derivative was found to complex and sense HgCl₂ and Hg(OAc)₂ by demonstrating fluorescence quenching upon Hg(II) addition in comparison with other metals (Zn(II), Cd(II), Pb(II)). No were observed for Cu(II), Ag(I) and Co(II). We have shown the complexation of Hg(II) by a disulfonamide and a bis-dansyl disulfonamide ligand using several spectroscopic methods. Ligand 1 was able to extract mercury into chloroform and form a complex in the presence of excess mercury by synergistic complexation with triethylamine acting as a co-ligand. X-ray and NMR both confirm a 1:2 HgL₂ stoichiometry. Ligand 2 can be used for sensing of Hg(II) as fluorescence quenching was observed after addition of Hg(II)