Published December 1, 2019 | Version v1
Journal article Metadata-only

Induction Hardening Process of G18NiMoCr3-6 Steel

Creators

  • 1. Jiangsu XCMG Construction Machinery Research Institute Ltd., Xuzhou Jiangsu 221004 (China)

Description

The microstructure and properties of G18NiMoCr3-6 steel after medium frequency. Quenching hardening with different process parameters and its heat treatment process optimizing were studied. The results show that the best combination is voltage 420V, cooling water flow 300L/h, moving speed 200mm/min. After medium frequency induction hardening process, the surface of G18NiMoCr3-6 steel generates uniform and small martensite, the strength and wear resistance significantly increases. (paper)

Availability note (English)

Available from http://dx.doi.org/10.1088/1757-899X/677/2/022085

Additional details

Identifiers

DOI
10.1088/1757-899X/677/2/022085;

Publishing Information

Journal Title
IOP Conference Series. Materials Science and Engineering (Online)
Journal Volume
677
Journal Issue
2
Journal Page Range
[5 p.]
ISSN
1757-899X

Conference

Title
4. International Conference on Insulating Materials, Material Application and Electrical Engineering
Dates
12-13 Oct 2019
Place
Melbourne (Australia)

INIS

Country of Publication
United Kingdom
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
54076125
Subject category
S36: MATERIALS SCIENCE; S42: ENGINEERING;
Resource subtype / Literary indicator
Conference
Descriptors DEI
COOLING; ELECTRIC POTENTIAL; HARDENING; HEAT TREATMENTS; INDUCTION; MARTENSITE; MICROSTRUCTURE; OPTIMIZATION; QUENCHING; STEELS; SURFACES; VELOCITY; WEAR RESISTANCE
Descriptors DEC
ALLOYS; CARBON ADDITIONS; IRON ALLOYS; IRON BASE ALLOYS; MECHANICAL PROPERTIES; TRANSITION ELEMENT ALLOYS