Published October 2006
| Version v1
Journal article
Microwave sintering of poly-ether-ether-ketone (PEEK) based coatings deposited on metallic substrate
Creators
- 1. Laboratoire d'Etudes et de Recherches sur les Materiaux, les Procedes et les Surfaces, Universite de Technologie de Belfort-Montbeliard, 90010 Belfort (France)
- 2. Swiss Federal Laboratories for Materials Testing and Research, Feuerwerkerstrasse 39, CH-3602 Thun (Switzerland)
Description
In this paper, the feasibility of microwave (MW) sintering PEEK (poly-ether-ether-ketone) based coatings was investigated. Three coatings were studied: pure PEEK, micron-SiC and nano-SiC particles filled (wt.10%) PEEK coatings. The results indicate that, for the two composite coatings, the SiC particles distributed in the polymer matrix, as a good MW susceptor, could be heated preferentially by MW radiation. Consequently, the polymer matrix was heated by these particles
Additional details
Identifiers
- DOI
- 10.1016/j.scriptamat.2006.06.010;
- PII
- S1359-6462(06)00437-4;
Publishing Information
- Journal Title
- Scripta Materialia
- Journal Volume
- 55
- Journal Issue
- 7
- Journal Page Range
- p. 621-624
- ISSN
- 1359-6462
- CODEN
- SCMAF7
INIS
- Country of Publication
- United Kingdom
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 38064078
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- COATINGS; ETHERS; KETONES; MATRIX MATERIALS; MICROWAVE RADIATION; PARTICLES; POLYMERS; SINTERING; SUBSTRATES
- Descriptors DEC
- ELECTROMAGNETIC RADIATION; FABRICATION; MATERIALS; ORGANIC COMPOUNDS; ORGANIC OXYGEN COMPOUNDS; RADIATIONS
Optional Information
- Copyright
- Copyright (c) 2006 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.