Developments in PWR cladding corrosion: materials and models

In pressurized water reactors Zircaloy-4 is a standard fuel cladding material. The aim of this paper is to present and evaluate corrosion data generated both in-reactor, and out-reactor on PWR claddings made of both Zircaloy-2 and Zircaloy-4 materials. The oxide thickness measurements of cladding tubes irradiated in the Ringhals 3 reactor, and oxide weight gain measurements carried out in Sandvik autoclaves at 400deg C, 10.3 MPa clearly show that the stress relief annealed Zircaloy-2 is more corrosion resistant than Zircaloy-4 produced with an identical fabrication route. Furthermore, autoclave tests indicate that the hydrogen pickup fraction of the two alloys is very similar. The obtained data have been evaluated in regard to chemical composition and heat treatment. In addition, computer models, which simulate thermal and hydraulic reactor conditions and corrosion kinetic processes simultaneously, have been to predict the in-reactor corrosion behaviour of the claddings. (orig.)