Published 2021 | Version v1
Book Metadata-only

Stress partitioning behavior of duplex alloys consisting of BCC and FCC phases at low temperature

Creators

  • 1. Japan Atomic Energy Agency (JAEA), J-PARC Center, Tokai, Ibaraki (Japan)
  • 2. Yokohama National University, Graduate School of Engineering, Yokohama, Kanagawa (Japan)
  • 3. Obayashi Corporation, Micron EN project Office, Higashi-Hiroshima, Hiroshima (Japan)
  • 4. Kanazawa University, Faculty of Mechanical Engineering, Kanazawa, Ishikawa (Japan)
  • 5. Yokohama National University, Faculty of Engineering, Yokohama, Kanagawa (Japan)

Description

In situ neutron diffraction measurements during tensile testing at room temperature and low temperature of a duplex stainless steel consisting of BCC and FCC phases have been performed. The deformation behavior, phase stresses and contributions of the constituent phases to the strength were analyzed and discussed. The steel showed good balance of strength and ductility at 200 K, and the phase stresses of the constituent phases at 200 K are larger than those at room temperature. Although the contributed stress to the strength of BCC phase was higher than that of FCC phase, the contribution portion to the strength of each constituent phases remained nearly constant as the test temperature changed. The strengthening with decreasing test temperature occurred in both BCC and FCC phases enhancing the work-hardening rate of the steel at low temperature. (author)

Availability note (English)

Available from DOI: https://doi.org/10.7566/JPSCP.33.011064
Part of:
Proceedings of the 3rd J-PARC Symposium (J-PARC2019)

Additional details

Identifiers

DOI
10.7566/JPSCP.33.011064;

Publishing Information

Publisher
Physical Society of Japan
Imprint Place
Tokyo (Japan)
ISBN
978-4-89027-146-7
Imprint Title
Proceedings of the 3rd J-PARC Symposium (J-PARC2019)
Imprint Pagination
[934 p.]
Journal Page Range
p. 011064.1-011064.6

Conference

Title
3. J-PARC symposium
Acronym
J-PARC2019
Dates
23-27 Sep 2019
Place
Tsukuba, Ibaraki (Japan)

INIS

Country of Publication
Japan
Country of Input or Organization
Japan
INIS RN
53056388
Subject category
S36: MATERIALS SCIENCE; S43: PARTICLE ACCELERATORS;
Resource subtype / Literary indicator
Conference
Descriptors DEI
AUSTENITE; BCC LATTICES; COLLIMATORS; DEFORMATION; DIFFRACTOMETERS; FCC LATTICES; FERRITE; NEUTRON DIFFRACTION; STAINLESS STEELS; STRAIN RATE; STRESSES; TENSILE PROPERTIES; TIME-OF-FLIGHT METHOD; YIELD STRENGTH
Descriptors DEC
ALLOYS; CARBON ADDITIONS; COHERENT SCATTERING; CRYSTAL LATTICES; CRYSTAL STRUCTURE; CUBIC LATTICES; DIFFRACTION; HIGH ALLOY STEELS; IRON ALLOYS; IRON BASE ALLOYS; MEASURING INSTRUMENTS; MECHANICAL PROPERTIES; SCATTERING; STEELS; THREE-DIMENSIONAL LATTICES; TRANSITION ELEMENT ALLOYS

Optional Information

Notes
17 refs., 4 figs., 1 tab.