Published August 25, 2008 | Version v1
Journal article

Fine nanoparticles of Al-SnO2 prepared by a co-precipitation route in water/oil microemulsion

  • 1. College of Chemistry and Chemical Engineering, Central South University, Changsha 410083 (China)
  • 2. State Key Laboratory of Powder Metallurgy, Changsha 410083 (China)

Description

Al-SnO2 nanoparticles have been successfully synthesized by a co-precipitation route in water-in-oil microemulsion consisting of water, DBS (surfactant), 1-amyl-alcohol (assistant surfactant) and cyclohexane (oil phase). The as-synthesized products were characterized with Fourier transform infrared spectroscopy (FT-IR), X-ray powder diffraction (XRD), energy dispersive spectroscopy (EDS) and transmission electron microscope (TEM). The results show that the particle size of Al-SnO2 is below 10 nm, while pure SnO2 is over 15 nm, which indicates that the introduction of Al can effectively prevent SnO2 from further growing up in the process of calcination. On the other hand, when the molar ratio of Al to Sn is 1:4 and the calcination temperature is 600 deg. C, the as-prepared Al-SnO2 nanoparticles have the lowest particle size in the experiments. In the photocatalytic degradation of phenol, the Al-SnO2 nanoparticles exhibit better activity than the pure SnO2 nanoparticles

Availability note (English)

Available from http://dx.doi.org/10.1016/j.jallcom.2007.08.051

Additional details

Identifiers

DOI
10.1016/j.jallcom.2007.08.051;
PII
S0925-8388(07)01729-X;

Publishing Information

Journal Title
Journal of Alloys and Compounds
Journal Volume
462
Journal Issue
1-2
Journal Page Range
p. 42-46
ISSN
0925-8388
CODEN
JALCEU

Optional Information

Copyright
Copyright (c) 2007 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.