Published October 2009 | Version v1
Journal article Metadata-only

Influence of quenching rate on the structural, soft magnetic and magnetoimpedance properties of melt-spun Co69Fe7Si14B10 alloy

Creators

  • 1. Defence Metallurgical Research Laboratory, P.O. Kanchanbagh, Hyderabad 500 058 (India)

Description

Melt-spun ribbons of Co69Fe7Si14B10 alloy have been prepared at different wheel speeds viz. 47, 34 and 17 m/s and investigated for structural and magnetic properties. Degree of amorphicity in the as-spun ribbons is found to increase with wheel speed. Amorphous phase crystallizes in two stages producing Co2Si, Co2B and CoSi phases on annealing. Increase in wheel speed improves soft magnetic and magnetoimpedance properties due to decrease in perpendicular anisotropy which is associated with stripe domain formation. On annealing soft magnetic properties and magnetoimpedance deteriorate due to the formation of crystalline phases.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.jmmm.2009.05.010

Additional details

Identifiers

DOI
10.1016/j.jmmm.2009.05.010;
PII
S0304-8853(09)00530-7;

Publishing Information

Journal Title
Journal of Magnetism and Magnetic Materials
Journal Volume
321
Journal Issue
19
Journal Page Range
p. 3084-3089
ISSN
0304-8853
CODEN
JMMMDC

INIS

Country of Publication
Netherlands
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
41009982
Subject category
S36: MATERIALS SCIENCE;
Descriptors DEI
AMORPHOUS STATE; ANISOTROPY; ANNEALING; BORON ALLOYS; COBALT ALLOYS; COBALT BORIDES; COBALT SILICIDES; IRON ALLOYS; MAGNETIC PROPERTIES; MAGNETS; QUENCHING; SILICON ALLOYS; SOLIDIFICATION; VELOCITY
Descriptors DEC
ALLOYS; BORIDES; BORON COMPOUNDS; COBALT COMPOUNDS; EQUIPMENT; HEAT TREATMENTS; PHASE TRANSFORMATIONS; PHYSICAL PROPERTIES; SILICIDES; SILICON COMPOUNDS; TRANSITION ELEMENT ALLOYS; TRANSITION ELEMENT COMPOUNDS

Optional Information

Copyright
Copyright (c) 2009 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.