Published April 15, 2009 | Version v1
Journal article

Fabrication of mesoporous and high specific surface area lanthanum carbide-carbon nanotube composites

  • 1. Universita di Padova, Dipartimento di Ingegneria Meccanica, Via Marzolo 9, 35131 Padova (Italy)
  • 2. INFN-Laboratori Nazionali di Legnaro, V.le dell'Universita 2, 35020 Legnaro (PD) (Italy)
  • 3. Universita di Padova, Dipartimento di Scienze Chimiche, Via Marzolo 1, 35131 Padova (Italy)
  • 4. Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802 (United States)

Description

Mesoporous lanthanum carbide-carbon nanotube composites were produced by means of carbothermal reaction of lanthanum oxide, graphite and multi-walled carbon nanotube mixtures under high vacuum. Residual gas analysis revealed the higher reactivity of lanthanum oxide towards carbon nanotubes compared to graphite. After sintering, the composites revealed a specific surface area increasing with the amount of carbon nanotubes introduced. The meso-porosity of carbon nanotubes was maintained after thermal treatment.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.jnucmat.2009.01.035

Additional details

Identifiers

DOI
10.1016/j.jnucmat.2009.01.035;
PII
S0022-3115(09)00019-1;

Publishing Information

Journal Title
Journal of Nuclear Materials
Journal Volume
385
Journal Issue
3
Journal Page Range
p. 582-590
ISSN
0022-3115
CODEN
JNUMAM

Optional Information

Copyright
Copyright (c) 2009 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.