Published June 1, 2018 | Version v1
Journal article

Dynamic moduli of cement paste with different kinds of recycled concrete admixtures

  • 1. Czech Technical University in Prague, Faculty of Civil Engineering, Prague, 166 29 (Czech Republic)

Description

This article deals with using recycled concrete powder as a partial replacement for cement. In particular, we focus on mechanical properties of cement pastes containing recycled concrete powder. We used three different recycled materials. The first recycled concrete powder was obtained from the PB2 and the SB8 railway sleepers, the second one was from the drainage gutter and the third one was from the monolithic construction of a pillar. All recycled materials were milled by LAVARIS Ltd. at high-speed milling process. Investigated mechanical properties were the dynamic modulus of elasticity and the dynamic shear modulus and were obtained by a non-destructive method: the resonance method. The dynamic modulus of elasticity and the dynamic shear modulus were examined and compared after 7, 14, 21 and 28 days of mixture curing. Results obtained from these materials were compared with the reference material. (paper)

Availability note (English)

Available from http://dx.doi.org/10.1088/1757-899X/379/1/012015

Additional details

Publishing Information

Journal Title
IOP Conference Series. Materials Science and Engineering (Online)
Journal Volume
379
Journal Issue
1
Journal Page Range
[6 p.]
ISSN
1757-899X

Conference

Title
International Conference Building Materials, Products and Technologies
Dates
29-31 May 2018
Place
Blansko-Ceskovice (Czech Republic)

INIS

Country of Publication
United Kingdom
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
52082324
Subject category
S36: MATERIALS SCIENCE; S37: INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL CHEMISTRY;
Resource subtype / Literary indicator
Conference
Descriptors DEI
CEMENTS; CONCRETES; CONSTRUCTION; CURING; ELASTICITY; MILLING; POWDERS; RESONANCE; SHEAR
Descriptors DEC
BUILDING MATERIALS; MACHINING; MATERIALS; MECHANICAL PROPERTIES