The effect of thermal history on intergranular boron segregation and fracture morphology of substoichiometric Ni3Al

While it has attractive mechanical properties and good corrosion resistance, the usefulness of polycrystalline Ni3Al has been restricted because of its propensity for brittle intergranular fracture. While this intergranular brittleness can be aggravated by the intergranular segregation of certain impurities, particularly sulfur, the grain boundaries of Ni3Al are intrinsically brittle and Ni3Al will fail intergranularly in the absence of detectable impurity segregation. Addition of boron resulted in the fracture morphology changing from primarily intergranular to largely transgranular; and more importantly, the intergranular segregation of boron was conclusively demonstrated. The range of boron concentrations over which these beneficial effects are observed is well within the solubility limit, which has been estimated to be 1.5 at. % (4,5). Rice (6) developed a relationship between equilibrium intergranular segregation and grain boundary cohesion. According to this theory, the potential for intergranular embrittlement by a solute is related to the relative intensity of segregation of the solute to free surfaces as compared to segregation to grain boundaries. Rices theory allowed for the case of a solute segregating more strongly to grain boundaries than to free surfaces. If this difference is sufficiently large (approximately a factor of two), Rice's theory predicts an enhancement of grain boudary cohesion. White and coworkers (4,7) noted the rather unusual phenomenon of boron segregating much more strongly to grain boundaries of Ni3Al than to free surfaces, while sulfur (an embrittling impurity) was shown to exhibit the opposite effect