A method of neptunium recovery into the product stream of the Purex 1st codecontamination step for LWR fuel reprocessing

An improved nitrous acid method was applied for recovering neptunium in spent fuel. Counter-current solvent extraction has been performed to find out its recovery conditions. The nitrous acid in the form of sodium salt solution was fed to the 1st stage of extraction section, and hydrazine nitrate was fed to some stages near feed point. Flow rate and the concentration of additives were altered for finding out optimum condition. Laboratory scale mixer-settlers having 6 ml of mixing volume and 17 ml of settling volume for each stage were used. The nitrous acid method was improved so that the reduction reaction in scrub section can be eliminated by the decomposition of the nitrous acid using a reagent such as sulfamic acid, urea, or hydrazine. In operation, the feed rate of the nitrous acid was about 3 mM/hr, and about 61% of neptunium charged was discharged in the product stream of Purex-1st codecontamination step designed for the LWR fuel reprocessing plant of Power Reactor and Nuclear Fuel Development Corporation. The calculated value of Δx/x for extraction section agreed with the experimental value, where Δx is the quantity of oxidation, and x is the inventory for neptunium in each stage. In conclusion, the improved nitrous acid method is effective for the neptunium discharge in product stream, and the difference of neptunium extraction between estimate and experiment is caused by some of reduction reaction in scrub section. (Iwakiri, K.)