Method of filling a fuel rod for a nuclear reactor with inert gas and closing it
Description
The method allows pressurized filling with inert gas of thinwalled fuel cans after previous evacuation. The can charged with fuel is brought into a filling device connected to a pressure tank and a vacuum pump. The can is closed on the upper and lower end by seemingly equal welded caps. The upper cap, however, has a central though bore and an annular tee-slot in the covering surface. After putting on and screwing of a pressure resistant cover on the pressure chamber, this cover and the can are evacuated. Then the valve to the inert gas cylinder is opened until the desired filling pressure is reached in the device and in the can. Then a welding electrode passed through is moved downward coaxially to the can. Its conical point hits the still open bore of the upper cap of the can. The inner collar of the annular tee-slot mentioned above is melted off and closes the upper cap pressure-tight. The cap also prevents transfer of the welding heat into the can. Internal fuel rod pressures from 70 to 133 at have successfully been applied; evacuation goes down to 0.1 Torr. (HP)
Availability note (English)
MF available from INIS under the Report Number; Also available from Dt. Patentamt, Muenchen (FRG).Abstract (German)
Das Verfahren ermoeglicht das Druckfuellen duenwandiger Huellrohre von Brennstaeben mit Inertgas nach vorheriger Evakuierung. Das mit Kernbrennstoff beschichte Huellrohr wird in eine Fuellvorrichtung gebracht mit einem Anschluss an einen Inertgas-Druckbehaelter und an eine Vakuumpumpe. Das Huellrohr ist oben und unten durch zunaechst gleichartige eingeschweisste Kappen verschlossen. Die obere Kappe weist jedoch eine zentrale durchgehende Bohrung und eine Ringnut in der Deckelflaeche auf. Nach Aufsetzen und Verschrauben eines druckdichten Deckels auf die Druckkammer werden diese und das Huellrohr evakuiert. Danach wird das Ventil zur Inertgasflasche so lange geoeffnet, bis in der Vorrichtung und im Huellrohr ein gewuenschter Fuelldruck erreicht ist. Dann wird eine durchgefuehrte Schweisselektrode koaxial zum Huellrohr nach unten bewegt. Ihre kegelfoermige Spitze trifft in die noch offene Bohrung der oberen Huellrohrkappe. Der innere Kragen der oben erwaehnten Ringnut wird abgeschmolzen und verschliesst die obere Huellrohrkappe druckdicht. Die Kappe verhindert auch das Abfliessen der Schweisswaerme in das Huellrohr. Brennstabinnendrucke von 70 bis 133 at wurden erfolgreich angewendet, die Evakuierung geht bis 0,1 Torr. (HP)Files
9395732.pdf
Files
(167.8 kB)
| Name | Size | Download all |
|---|---|---|
|
md5:b50f09614e5afa1aa479146812eb0bcc
|
167.8 kB | Preview Download |
Additional details
Additional titles
- Original title (German)
- Verfahren zum Inertgasfuellen und Verschliessen eines Kernreaktor-Brennstabes
Publishing Information
- Imprint Pagination
- 5 p.
- IPC:
- Int. Cl. G21C 3/10.
- IPC
- Int. Cl. G21C 3/10.
- Patent number
- DE patent document 1806599/B/
INIS
- Country of Publication
- Germany
- Country of Input or Organization
- Germany
- INIS RN
- 9395732
- Subject category
- S22: GENERAL STUDIES OF NUCLEAR REACTORS;
- Descriptors DEI
- CLADDING; CLOSURES; FABRICATION; FUEL CANS; FUEL RODS
- Descriptors DEC
- DEPOSITION; FUEL ELEMENTS; REACTOR COMPONENTS; SURFACE COATING
Optional Information
- Notes
- 2 figs.