Atmospheric oxygen plasma activation of silicon (100) surfaces

Silicon (100) surfaces were converted to a hydrophilic state with a water contact angle of <5 deg. by treatment with a radio frequency, atmospheric pressure helium, and oxygen plasma. A 2 in. wide plasma beam, operating at 250 W, 1.0 l/min O2, 30 l/min He, and a source-to-sample distance of 3±0.1 mm, was scanned over the sample at 100±2 mm/s. Plasma oxidation of HF-etched silicon caused the dispersive component of the surface energy to decrease from 55.1 to 25.8 dyn/cm, whereas the polar component of the surface energy increased from 0.3 to 42.1 dyn/cm. X-ray photoelectron spectroscopy revealed that the treatment generated a monolayer of covalently bonded oxygen on the Si(100) surface 0.15±0.10 nm thick. The surface oxidation kinetics have been measured by monitoring the change in water contact angle with treatment time, and are consistent with a process that is limited by the mass transfer of ground-state oxygen atoms to the silicon surface.