Published May 2007
| Version v1
Journal article
Effect of ion implantation on surface properties of polystyrene
- 1. Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup (Korea, Republic of)
Description
Ion implantation on polystyrene (PS) was carried under various conditions to figure out the ion implantation effect on the surface. Ar ion implantation was performed at an energy of 100 keV with fluences from 1 X 1013 to 1 X 1017 ions cm-2 at room temperature. The surface properties of implanted polystyrene were investigated by means of FT-IR, contact angle and XPS analysis. The contact angles gradually decreased up to 58 degrees angle with increasing fluences up to 1 X 1015 ions cm-2, beyond which it increased. On the basis of XPS results, it was observed that the O/C atomic ratio also increases with increasing fluences up to 1 X 1015 ions cm-2, beyond which it decreased
Additional details
Publishing Information
- Journal Title
- Journal of Radiation Industry
- Journal Volume
- 1
- Journal Issue
- 1
- Series
- 9 refs, 4 figs, 1 tab
- Journal Page Range
- p. 35-38
- ISSN
- 1976-2402
INIS
- Country of Publication
- Korea, Republic of
- Country of Input or Organization
- Korea, Republic of
- INIS RN
- 47084748
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- ATOMS; ENERGY; ION IMPLANTATION; POLYSTYRENE; SURFACES
- Descriptors DEC
- MATERIALS; ORGANIC COMPOUNDS; ORGANIC POLYMERS; PETROCHEMICALS; PETROLEUM PRODUCTS; PLASTICS; POLYMERS; POLYOLEFINS; POLYVINYLS; SYNTHETIC MATERIALS