Published December 2015 | Version v1
Journal article

Source contributions and regional transport of primary particulate matter in China

  • 1. Jiangsu Key Laboratory of Atmospheric Environment Monitoring and Pollution Control, Jiangsu Engineering Technology Research Center of Environmental Cleaning Materials, Collaborative Innovation Center of Atmospheric Environment and Equipment Technology, School of Environmental Science and Engineering, Nanjing University of Information Science & Technology, 219 Ningliu Road, Nanjing, 210044 (China)
  • 2. Zachry Department of Civil Engineering, Texas A&M University, College Station, TX, 77843-3136 (United States)
  • 3. State Key Joint Laboratory of Environment Simulation and Pollution Control, School of Environment, Tsinghua University, Beijing, 100084 (China)
  • 4. Ministry of Education Key Laboratory for Earth System Modeling, Center for Earth System Science, Tsinghua University, Beijing, 100084 (China)
  • 5. School of Chemistry & Environment, Beihang University, Beijing, 100191 (China)
  • 6. Key Laboratory of Reservoir Aquatic Environment, Chongqing Institute of Green and Intelligent Technology, Chinese Academy of Sciences, Chongqing, 400714 (China)
  • 7. Department of Civil and Environmental Engineering, Louisiana State University, Baton Rouge, LA, 70803 (United States)

Description

A source-oriented CMAQ was applied to determine source sector/region contributions to primary particulate matter (PPM) in China. Four months were simulated with emissions grouped to eight regions and six sectors. Predicted elemental carbon (EC), primary organic carbon (POC), and PPM concentrations and source contributions agree with measurements and have significant spatiotemporal variations. Residential is a major contributor to spring/winter EC (50–80%), POC (60%–90%), and PPM (30–70%). For summer/fall, industrial contributes 30–50% for EC/POC and 40–60% for PPM. Transportation is more important for EC (20–30%) than POC/PPM (<5%). Open burning is important in summer/fall of Guangzhou and Chongqing. Dust contributes to 1/3–1/2 in spring/fall of Beijing, Xi'an and Chongqing. Based on sector–region combination, local residential/transportation and residential/industrial from Heibei are major contributors to spring PPM in Beijing. In summer/fall, local industrial is the largest. In winter, residential/industrial from local and Hebei account for >90% in Beijing. - Highlights: • A source-oriented CMAQ was established for primary particulate matter (PPM). • Source and region contributions to EC, POC and PPM in China were quantified. • Residential is major in spring/winter and industrial dominates in summer/fall. • Open burning is more important for southern while dust is in contrast. • Both local and Heibei emissions contribute to PPM in Beijing. - Source and region contributions to primary particulate matter in China were quantified for four months during 2012-2013. Residential and industrial are the major contributors.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.envpol.2015.08.037

Additional details

Identifiers

DOI
10.1016/j.envpol.2015.08.037;
PII
S0269-7491(15)30031-2;

Publishing Information

Journal Title
Environmental Pollution (1987)
Journal Volume
207
Journal Page Range
p. 31-42
ISSN
0269-7491
CODEN
ENPOEK

INIS

Country of Publication
United Kingdom
Country of Input or Organization
International Atomic Energy Agency (IAEA)
INIS RN
48034413
Subject category
S54: ENVIRONMENTAL SCIENCES;
Descriptors DEI
AEROSOLS; CARBON; CHINA; ECOLOGICAL CONCENTRATION; PARTICULATES; TRANSPORT
Descriptors DEC
ASIA; COLLOIDS; DISPERSIONS; ELEMENTS; NONMETALS; PARTICLES; SOLS

Optional Information

Copyright
Copyright (c) 2015 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.