Published December 1, 2013 | Version v1
Journal article

Effect of particle in-flight behavior on the composition of thermal barrier coatings

  • 1. State Key Laboratory for Mechanical Behavior of Materials, Xi'an Jiaotong University, Xi'an 710049 (China)
  • 2. School of Mechanical Engineering, Xi'an Jiaotong University, Xi'an 710049 (China)
  • 3. State Key Laboratory for Strength and Vibration of Mechanical Structures, Xi'an Jiaotong University, Xi'an 710049 (China)

Description

In this work, 6 to 11 mol% YO1.5-stabilized zirconia (YSZ) coatings were deposited by supersonic and conventional atmospheric plasma spraying. During spraying, the surface temperature and velocity of in-flight particles were monitored by Spray Watch 2i on-line system. The phase composition of as-sprayed coatings was analyzed by X-ray diffractometry (XRD). Lattice parameters, tetragonality and the content of YO1.5 (mol%) of as-sprayed coatings were calculated according to the position of (0 0 4) and (4 0 0) diffraction peaks. It was found that the as-sprayed coatings were composed of metastable non-transformable tetragonal phase (t′). However, the amount of YO1.5 (mol%) in the as-sprayed coatings decreased with the increase of melting index of in-flight particles due to the partial evaporation of YO1.5 during spraying.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.apsusc.2013.09.045

Additional details

Identifiers

DOI
10.1016/j.apsusc.2013.09.045;
PII
S0169-4332(13)01686-3;

Publishing Information

Journal Title
Applied Surface Science
Journal Volume
286
Journal Issue
Complete
Journal Page Range
p. 184-191
ISSN
0169-4332
CODEN
ASUSEE

Optional Information

Copyright
Copyright (c) 2013 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.