Evaluation of doses and risks from different decontamination and decommissioning strategies using the PRESTO-II methodology

The PRESTO-II methodology may be applied to evaluate doses and health risks from a variety of decontamination and decommissioning activities. This methodology has been implemented in the form of a computer code that has been applied to several sites, and that has been extensively documented. Radionuclide inventories are specified as separate contamination sources either present on the ground surface, covered by non-radioactive soils but lying above the water table, suspended in the atmosphere, or dissolved in surface waters. Hydrologic transport mechanisms considered in the PRESTO-II methodology include chemical exchange, ponding and overflow, surface water transport, groundwater transport, and pumping contaminated groundwater from wells. Varied scenarios of water usage are treated. Atmospheric inputs are based on both resuspension factor and resuspension rate approaches, with inhalation and immersion doses based on a Gaussian plume transport calculation. Site activities that are considered include land clearing, farming, and residing on the site. Exposure and dose calculations are derived from the US Nuclear Regulatory Commission Reg. Guide 1.109 approach, while risk calculations use a life-table approach developed for the US Environmental Protection Agency (EPA). Internal dose conversion factors are taken from ICRP 26 and 30, while risk conversion factors are values suggested by EPA