A working model for particle deposition in turbulent flow
Creators
Description
The free flight model of particle deposition from the core of a turbulent flow on to a wall relies on the assumption that a particle starts its flight from the correct distance away from the wall. Approximate agreement with experiment is only obtained by resorting to dubious assumptions. In this paper the idea of the frequency response of a particle to turbulent fluid motion is utilised to show how the 'cut off' distance yc at which the particle begins its free flight is related to the particle and flow parameters. Experimental data are used in conjunction with theoretical arguments to show that the dimensionless cut off distance, yc+, can be correlated by an expression of the form(f d(yc+=B(dp+)2(αS)))where dp+ is the dimensionless particle diameter, S is the ratio of particle to fluid densities, and B and α are dimensionless constants. For air carrying small particles, the constants take the values 18.1 and 2.97x10-4, respectively
Additional details
Identifiers
- PII
- S0306454999000869;
Publishing Information
- Journal Title
- Annals of Nuclear Energy (Oxford)
- Journal Volume
- 27
- Journal Issue
- 8
- Journal Page Range
- p. 673-695
- ISSN
- 0306-4549
- CODEN
- ANENDJ
INIS
- Country of Publication
- United Kingdom
- Country of Input or Organization
- International Atomic Energy Agency (IAEA)
- INIS RN
- 33030162
- Subject category
- S22: GENERAL STUDIES OF NUCLEAR REACTORS;
- Descriptors DEI
- CALCULATION METHODS; DEPOSITION; REACTOR COOLING SYSTEMS; REACTOR CORES; TURBULENT FLOW
- Descriptors DEC
- COOLING SYSTEMS; ENERGY SYSTEMS; FLUID FLOW; REACTOR COMPONENTS
Optional Information
- Copyright
- Copyright (c) 2000 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.