Published April 15, 2017 | Version v1
Journal article

Microscopic characterisation of black crusts on different substrates

  • 1. CERENA, Instituto Superior Técnico, Universidade de Lisboa, Av. Rovisco Pais, 1049-001 Lisboa (Portugal)
  • 2. Departamento de Enxeñaría de Recursos Naturais e Medioambiente, Escola de Minas, Universidade de Vigo, Campus Lagoas-Marcosende, 36310 Vigo (Spain)

Description

Black crusts on different substrates (carbonate and silicate stones, cement-based mortar and carbonate detrital deposits) in urban environments were characterized microscopically by analysing their morphologies and compositions. The objective of this article is to study the interaction between the substrate and the crust and the influence of the environmental conditions on the crust development. On the one hand, the internal structure and morphology of each sample were evaluated with stereo and scanning electron microscopies. On the other hand, the black crust composition was accessed by X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy in backscattered electron mode combined with energy dispersive x-ray spectroscopy. The results of these analytical techniques provided interesting information about the composition and the mineralogical phases present in the collected black crusts. In most of the cases, gypsum was detected as the main component exhibiting different habits. Calcite was also detected in all the evaluated gypsum black crusts; its presence was attributed to different origins. The substrate-crust interaction was also evaluated, contributing to distinguish different crust development processes in relation to the substrate. In carbonate substrates (limestones, mortar and carbonate detrital deposits), it was detected a continuous diffuse boundary related to the replacement of Ca-carbonate by Ca-sulphate, while this boundary was significantly more defined for the granitic stone. This study shows that the substrate, the presence of different construction materials, (e.g. mortars), the motor exhaust particulate substances and the concentrations of atmospheric pollutants, the marine influence as well as biological or other anthropogenic compounds are decisive factors in the development of the black crust. Some ideas about the establishment of conservation strategies are also shown. - Highlights: • Gypsum black crust on different substrates was characterized. • The darkest black crusts were found on the stones under higher PM10 concentrations. • Chlorides and phosphates were found mainly on black crust at the city centre. • Several sources are decisive in the black crust development.

Availability note (English)

Available from http://dx.doi.org/10.1016/j.scitotenv.2016.12.080

Additional details

Identifiers

DOI
10.1016/j.scitotenv.2016.12.080;
PII
S0048-9697(16)32767-X;

Publishing Information

Journal Title
Science of the Total Environment
Journal Volume
584-585
Journal Page Range
p. 291-306
ISSN
0048-9697
CODEN
STENDL

Optional Information

Copyright
Copyright (c) 2016 Elsevier Science B.V., Amsterdam, The Netherlands, All rights reserved.