Linear theta-pinch neutron source

The linear theta pinch is optimized with respect to maximum neutron current on a sample located between the discharge tube and the compression coil wall. Emphasis throughout is placed on physics and technology considerations which govern the choice of parameters. Technological demands are (hopefully) kept to a minimum. Two ''point designs'' are developed which are distinguished by their compressional magnetic field (i.e., coil current) wave-forms: one is sinusoidal and continuous, the other trapezoidal and pulsed intermittently. Both point designs give an average neutron current of approximately 5 x 1013 n/cm2/s. Both devices are characterized by short lengths (approximately 1 m), rapid cycling (2-30 kHz), and magnetic mirrors (2 - 5:1) at the ends. A crucial item is the power supply, which is discussed in detail