Effect of cooling route on microstructure and mechanical properties of twin-roll casting low carbon steels with an application of oxide metallurgy technology

The oxide metallurgy was employed in the fabrication of twin-roll strip casting low carbon steels. The quantitative dependences of the microstructure and mechanical properties on cooling parameters were revealed and emphatically investigated. After twin-roll strip casting, a two-step cooling route closed to the actual process was designed and the cooling rates exhibited great influences on the proportion of polygonal ferrite (PF) and acicular ferrite (AF). With increasing cooling rates in both steps, the AF volume fraction raised from 0.04 to 0.75 because the rapid cooling restrained the formation of PF. The AF laths were induced by fine Al–Si–Ti–Mn composite oxides (0.2–2 μm), leading to a heterogeneous microstructure consisting of PF and AF clusters with high proportion of large-angle (≥15°) grain boundaries. It was found that the AF laths kept K–S relationship with austenite and AF laths with collinear growth direction belong to the same codirectional variants group in one AF cluster. With the increase of AF volume fraction, the yield strength (YS) and the ultimate tensile strength (UTS) were improved, while the strip retained excellent elongation. The improved YS was mainly ascribed to the grain boundary strengthening and dislocation strengthening.