Effect of mean stress (stress ratio) and aging on fatigue-crack growth in a metastable beta titanium alloy, Ti-10V-2Fe-3Al
Description
The effect of mean stress, or the stress ratio (R), on the fatigue-crack growth (FCG) behavior of α-aged and ω-aged microstructures of the beta titanium alloy Ti-10V-2Fe-3Al was investigated. While the mean stress had a negligible effect on the FCG behavior of the α-aged microstructure, a strong effect was observed in the ω-aged microstructure. In particular, the values of the threshold stress-intensity range (ΔKth) exhibited a strong dependence on R in the ω-aged microstructure, while this dependence was weak in the α-aged microstructure. These effects seem to arise primarily from fracture-surface roughness-induced crack closure. The crack closure levels for the α-aged microstructure were found to be very low compared to those for the ω-aged microstructure. Transmission electron microscopy and scanning electron microscopy studies of microstructures and fracture surfaces were performed to gain insight into the deformation characteristics and crack propagation mechanisms, respectively, in these microstructures. The microstructure-induced differences in FCG behavior are rationalized in terms of the effect of aging on slip and crack closure
Additional details
Publishing Information
- Journal Title
- Metallurgical and Materials Transactions. A, Physical Metallurgy and Materials Science
- Journal Volume
- 31
- Journal Issue
- 3
- Journal Page Range
- p. 703-714
- ISSN
- 1073-5623
- CODEN
- MMTAEB
INIS
- Country of Publication
- United States
- Country of Input or Organization
- United States
- INIS RN
- 31026178
- Subject category
- S36: MATERIALS SCIENCE;
- Descriptors DEI
- ALUMINIUM ALLOYS; CRACK PROPAGATION; FATIGUE; FRACTURE MECHANICS; IRON ALLOYS; MICROSTRUCTURE; STRESS INTENSITY FACTORS; STRESSES; TITANIUM ALLOYS; VANADIUM ALLOYS
- Descriptors DEC
- ALLOYS; MECHANICAL PROPERTIES; MECHANICS; TRANSITION ELEMENT ALLOYS