Published 1991 | Version v1
Report Metadata-only

Operational experience with SLC damping ring kicker magnets

Creators

  • 1. Stanford Linear Accelerator Center, CA (United States)

Description

The damping ring kickers for the SLAC Linear Collider must provide 7 mrad kicks to 1.2 GeV beams with 60 nsec rise and fall times and fit in a 50 cm length around a 21 mm diameter ceramic beam pipe. This requires that they operate at up to 40 KV. The construction and operation of two types of quasi-coaxial ferrite magnet potted with RTV silicone rubber is discussed. Production yield has been improved by changes in RTV degassing, transfer, and cure. Operation lifetime is dominated by voltage, radiation, and thermal cycling

Additional details

Publishing Information

Imprint Title
Conference record of the 1991 IEEE particle accelerator conference: Accelerator science and technology. Volume 4 of 5
Imprint Pagination
715 p.
Journal Page Range
p. 2331-2333.
Report number
DOE/ER/40607--1-Vol.4

Conference

Title
1991 Institute of Electrical and Electronics Engineers (IEEE) particle accelerator conference (PAC).
Dates
6-11 May 1991.
Place
San Francisco, CA (United States).

INIS

Country of Publication
United States
Country of Input or Organization
United States
INIS RN
24011235
Subject category
S43: PARTICLE ACCELERATORS;
Resource subtype / Literary indicator
Conference, Non-conventional Literature
Descriptors DEI
DAMPING; DIAGRAMS; KICKER MAGNETS; OPERATION; POTTING; SEPTUM MAGNETS; STANFORD LINEAR COLLIDER; SYNCHROTRONS; VACUUM SYSTEMS
Descriptors DEC
ACCELERATORS; CYCLIC ACCELERATORS; EQUIPMENT; INFORMATION; LINEAR ACCELERATORS; MAGNETS

Optional Information

Contract/Grant/Project number
Contract AC03-76SF00515
Secondary number(s)
CONF-910505--Vol.4.