Superconducting state stability in second generation high-temperature superconducting wires with varying copper stabilizer thickness under AC overcurrent conditions

Superconducting state stability in high-temperature superconducting (HTS) wires is of great importance for the reliable operation of superconducting electric power equipment. To this end, a study was made of the steady state operation and transients under AC current overloading in second generation (2G) HTS tape wires with a copper stabilizing layer of varying thickness. The existence of a threshold stabilizer thickness has been found, such that determines the HTS tape I-V curve and transients when an overcritical current flows. If the current exceeds the critical value, primary instability takes place in a wire with no stabilizer layer as well as with a layer of any thickness. In a wire with the stabilizer thickness less than the threshold level, an irreversible superconducting-to-normal transition occurs. However, if the copper layer thickness exceeds the threshold thickness, the HTS wire stable overloaded state recovers after some transients that have an irregular oscillation shape. The recovery of the stable thermal state under overcurrent conditions in HTS wires with an over-threshold stabilizer thickness is applicable in a variety of superconducting electric power devices, such as transformers and current limiters with a high capability to withstand faults. The measurements also show that the loss of superconductivity under AC overcritical current is followed by the phase angle changing between voltage and current. This phenomenon could be used for fast response normal zone detection in current-carrying conductors of superconducting equipment. (paper)